Products - Gas Handling Equipments - Gas Cyliender Manifolds / Pressure Reducing Stations

Gas Pressure Regulators

Instrumentation & System Valves

Pressure Hoses

Gas Cylinder Manifolds

Pressure Reducing Stations

Gas Purification System

Gas Cylinder Cabinets

Sampling Cylinders

Cylinder Handling Accessories

Download

Gas Manifolds Brochure

Why a Gas Distribution System?

If you think about it, most of the gases are toxic, flammable, corrosive, or often a combination of these. Other gases constitute a different hazard-such as asphyxiation, anesthesia or, simply, pressure. For some customer installations, a simple pressure regulator or control valve will not suffice, for example:

Where the gas, for physical considerations of space or location, must be stored in an area remote from point of use.

Where two or more cylinders are coupled together for high flow-rates.

Where a regular purge cycle is required between gas uses or at cylinder change-over.

Where safety considerations with a toxic or flammable gas require that equipment and/or pipelines containing that gas should be totally isolated from the working environment.

Where gas flow, pressure or temperature requirements are such that a very sophisticated means of gas control is required, especially in bulk gas installations.

In this there is clearly a need for a specialist designed Gas Distribution System.

What is a Gas Distribution System?

At its simplest, a GAS DISTRIBUTION SYSTEM can be a regulator or control valve and pipeline with the use point.
Connecting two or more cylinders together to give a common outlet constitutes a MANIFOLD. Manifolds are used to give increased flow rates or reduced cylinder change-over frequency compared with single cylinder operation.

Manifold can be supplied in many forms and with a variety of features including:

	Single or twin spur
	Automatic, Semi-automatic or manual operation.
	With or without purge facility.

Manifold: (Manual & Automatic System – for all kind of gases):

Manifold permit connection of several cylinders to a common supply line to provide a large continuous supply of gas. At a time one can install as many cylinders for supply of gas.

We manufacture manifold rated for pressure up to 6000 psig. Our designs have become standard over the years. We welcome enquiries on configuration and/or materials of construction to meet your specific intended gas service, cylinder valve outlet designation, number of cylinders (or stations) to be connected and service of pressure required. Sketch with proper dimensions will help us offer manifolds to suit your specific requirement.

High pressure Multi-Cylinder Truck/Trolley mounted Carts & Cascades:

These cylinder quads are normally used for filling and transportation of high-pressure gas cylinders, to use where large and continuous gas supply required, like for offshore activities.
These system consisting number of cylinders bundled by sturdy steel fabricated frame and all cylinders are connected by common manifold including Pressure Indicator, Flow control valve, Pigtails, Pressure Regulator, Purge valve etc.